View OAT1041F-V5-C-05_7112577.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 1 oki confidential oat1041x-v5-z-yy(for 12km) oc-192/stm-64 serdes transceiver module modification history rev. date originator comment draft0.1 aug.16.2002 t.itou draft0.2 sep.05.2002 t.itou draft0.3 sep.25.2002 t.itou revision of absolute maximum of vee draft0.4 oct.2.2002 t.itou additional of i2c diagnostic monitor draft0.4 oct.17.2002 t.itou change of distance features ; ? 10g sff transceiver ? sonet/sdh 9.953gbps operation ? sr-1/i64.1 @ oat1041x-v5-a-yy ? support 10.3gbps(10gbe), 10.66gbps(fec) and 10.7gbps(otn) rate ? wavelength : 1310nm band ? transmission distance : ? 1 ? 2km(40ps/nm) @oat1041x-v5-a-yy ? dispersion penalty : <1db ? 16-bit parallel 622.08mbps(equivalent fec rate) lvds data interface ? serdes timing compliant with oif1999.102.8 sfi-4 interface ? jitter filter built-in (oat1041x-v5-c-yy, multi-rate type removes) ? txrefclk frequency of 622mhz is standard. (oat1041x-v5-c-yy, multi-rate type removes) ? compact size: 50.8 x 76.2 x 11.5 (mm) ? supply voltage : +3.3v , +1.8v and -5.2v ? low power consumption: <4.8w max.(3.8w typ.) ? i2c compatible bus for simple status data monitor application ; ? metro network sonet/sdh system ? 10 gigabit ethernet system ? forward error correction system ? optical transport network (otn) system document number: qps-0302-020 revision: draft 0.5 date: oct.17.2002 author: t.itou project manager: t. itou
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 2 oki confidential 1. 1. 1. 1. block diagram lsenable txdin[0:15]p/n txpiclkp/n oc-192 optical output txlockerr tx e-o driver apc txrefclkp/n txpclkp/n mux with cmu txreset txrefsel txmclkp/n rxpoclkp/n rxdout[0:15]p/n rxrefclkp/n rxlockerr oc-192 optical input rxpowmon rx o-e cdr with demux rxlckref rxpowalm rxmclkp/n lsbiasmon lspowmon lspowalm lsbiasalm txratesel0/1 txfifores rxmutepoclk rxmutemclk rxmutedout rxratesel0/1 16 16 rxrefsel opt mon +3.3v +1.8v -5.2v gnd txfifoerr serial monitor i2cclock i2cclock ? txrefsel,txratesel0/1 are available for multi-rate type, oat1041x-v5-c-yy. figure 1 block diagram
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 3 oki confidential 2. 2. 2. 2. absolute maximum ratings stresses in excess of the absolute maximum ratings can cause permanent damage to the device. table 2 absolute maximum ratings parameter symbol min. max. units v dd1 -0.5 3.6 v v dd2 -0.5 2.0 v supply voltage v ee -6.0 +0.5 v lvds input pin ? 0 2.7 v lvttl input pin ? 0 3.6 v lvttl output sink current ? ? 50 ma lvttl output source current ? ? -50 ma optical input power pin_max ? 3 dbm tension of fiber ? ? 500 g fiber bend radius ? 30 ? mm storage temperature tstg -40 85 degc 3.operating environment electrical and optical characteristics below are defined under this operating environment, unless otherwise specified. table 3 operating environment parameter symbol min. typ. max. units v dd1 3.13 3.3 3.46 v v dd2 1.71 1.8 1.89 supply voltage v ee -4.94 -5.2 -5.46 supply current i dd1 0.4 a i dd2 1.2 i ee 0.5 case temperature tc 0 70 degc power consumption ? 3.8 4.8 w
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 4 oki confidential 4. 4. 4. 4. specifications 4-1 optical interface specifications table 4.1 optical interface specifications parts number 1041x-v5-a-yy parameter symbol min max units note bit rate 9.95328 gbit/s transmitter optical output power po -6 -1 dbm optical waveform oc-192/stm-64 unamplified mask standard figure 4.1 g.693 center wavelength c 1290 1330 nm extinction ratio er 6.0 ? db spectral maximum ?20db width ? 20 ? 1.0 nm side mode suppression ratio smsr 30 ? db receiver minimum sensitivity pin ? -14 dbm ber@1x10 -12 minimum overload pin -1 ? dbm input wavelength c_rx 1280 1580 nm rx return loss 27 db jitter performance jitter generation ? 0.1 uip-p bandpass filter; 50k to 80mhz jitter tolerance and transfer compliant with gr-253 figure 4.2,4.3 optical path dispersion d lrmax ? 40 ps/nm optical path penalty ? 1 db condition; case temperature: 0 to 70degc, nrz,prbs2 31 -1 , mark ratio: 1/2, supply voltage:+3.3v,+1.8v,-5.2v each +/-5%
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 5 oki confidential 0.2 0.75 0.25 0 -0.25 1 1.4 logic 1 logic 0 amplitude 01 time(ui) figure 4.1 eye pattern mask input jitter amplitude [uipp] jitter frequency [hz] slope=-20db/decade 15 1.5 0.15 10 2k 20k 400k 4m slope=-20db/decade acceptable range figure 4.2 jitter tolerance mask jitter gain [db] 0.1 120k frequency [hz] slope=-20db/decade acceptable range figure 4.3 jitter transfer mask comply gr693
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 6 oki confidential 4-2 electrical interface table 4.2.1 reference clock characteristics symbol parameter min. typ max. units interface notes tx reference clock txrefclkp/n a frequency 622.08 mhz ac oc-192/stm-64 155.52 644.53 10gbe(10.3gbps) 161.13 666.51 fec 166.63 669.32 otn 167.33 155.52/161.13/166.63/167.33 or 622.08/644.53/666.51/669.32 coupled (internally has capacitor) multi-rate type. frequency -20 ? +20 ppm oc-192/stm-64 tolelance -100 ? +100 10gbe(10.3gbps) duty cycle 40 ? 60 % input levels 400 ? 900 mv p-p single-ended voltage swing rx reference clock rxrefclkp/n frequency 155.52 or 622.08 mhz oc-192/stm-64 161.13 or 644.53 ac coupled 10gbe(10.3gbps) 166.63 or 666.51 fec 167.33 or 669.32 otn 155.52/161.13/166.63/167.33 or 622.08/644.53/666.51/669.32 (internally has capacitor) multi-rate type. frequency -20 ? +20 ppm oc-192/stm-64 tolelance -100 ? +100 10gbe(10.3gbps) duty cycle 40 ? 60 % input levels 400 ? 900 mv p-p single-ended voltage swing a. 600mhz operation of txrefclk is a standard. moreover, we can prepare txrefclk by 150mhz . and only txrefclk frequency of multi-rate type, oat1041x-v5-c-yy, is available to select 150mhz or 600mhz.
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 7 oki confidential table 4.2.2 transmitter/receiver parallel data/clock interface function i/o interface note transmitter txdin[0:15]p/n transmitter 16-bit parallel date input i lvds txdin0:lsb, txdin15:msb txpiclkp/n transmitter source synchronous parallel input clock i lvds txpclkp/n transmitter counter clock o lvds receiver rxdout[0:15]p/n receiver 16-bit parallel date output o lvds rxdout0:lsb, rxdout15:msb rxpoclkp/n receiver source synchronous parallel output clock o lvds table 4.2.3 transmitter/receiver parallel data/clock timing parameter symbol min. max. units note transmitter data/clk input timing txpiclk duty cycle tw/to 40 60 % rise time tr ? 300 ps 20 ? 80% fall time tf ? 300 ps 80 ? 20% txdin setup time ts 300 ? ps hold time th 300 ? ps th ts txpiclkp txdin[0:15]p/n tw to receiver data/clk output timing rxpoclk duty cycle tw/to 45 55 % rise time tr ? 250 ps 20 ? 80% fall time tf ? 250 ps 80 ? 20% rxdout data/clock skew tcq_min, ? 200 ps tcq_max ? 200 ps tcq_max tcq_min rxpoclkp rxdout[0:15]p/n tw to
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 8 oki confidential table 4.2.4 monitor clock function i/o interface note transmitter txmclkp/n transmitter monitor clock o lvds f=txrefclk frequency receiver rxmclkp/n receiver monitor clock o lvds f=rxrefclk frequency table 4.2.5 transmitter data rate select txratesel0 txratesel1 function note serial data rate parallel data rate h h 9.95328gbps 622.08mbps l l 10.3125gbps 644.54mbps h l 10.664 to 10.709gbps 666.51 to 669.32mbps l h lvttl interface internal 100 k ? pull up to v dd1 table 4.2.6 receiver data rate select rxratesel0 rxratesel1 function note serial data rate parallel data rate h h 9.95328gbps 622.08mbps l l 10.3125gbps 644.54mbps h l 10.664 to 10.709gbps 666.51 to 669.32mbps l h lvttl interface internal 100k ? pull up to v dd1 table 4.2.7 digital control signals symbol function interface description note transmitter lvttl l selects 155mhz txrefsel a selects tx 155mhz or 622mhz reference clock h selects 622mhz internal 100 k ? pull up to v dd1 lvttl l mux reset txreset asynchronous system reset h normal operation internal 100 k ? pull up to v dd1 lvttl l mux fifo reset txfifores mux fifo reset h normal operation internal 100 k ? pull up to v dd1 lsenable enable/disables laser lvttl l normal operation h laser disabled internal 100 k ? pull down to gnd receiver l selects 155/161/166/167mhz rxrefsel selects rx 155mhz or 622mhz reference clock lvttl h selects 622/644/666/669mhz internal 100 k ? pull down to gnd rxlckref lvttl l locks to rxrefclk locks rxpoclk to rxrefclk h normal operation internal 100 k ? pull up to v dd1 lvttl l mutes the rxdout[0:15] rxmutedout mutes the rxdout[0:15] to logical zero h normal operation internal 100 k ? pull up to v dd1 lvttl l mutes the rxpoclk rxmutepoclk mutes the rxpoclk to logical zero h normal operation internal 100 k ? pull up to v dd1 lvttl l mutes the rxmclk rxmutemclk mutes the rxmclk to logical zero h normal operation internal 100 k ? pull up to v dd1 a. txrefsel is available for multi-rate type, oat1041x-v5-c-yy.
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 9 oki confidential table 4.2.8 alarms symbol function interface description note transmitter txlockerr loss of txpll lock lvttl l alarm active h normal operation txfifoerr mux fifo error lvttl l alarm active h normal operation lsbiasalm laser bias out of range lvttl l alarm active ib> 120ma (typ.) h normal operation lspowalm lvttl l alarm active output power degrades 3db below the po (bol) laser output power out of range h normal operation receiver rxlockerr loss of rxpll lock lvttl l alarm active h normal operation rxpowalm lvttl l alarm active pin<-19dbm (typ.) loss of receiver average power alarm h normal operation table 4.2.9 monitor signals symbol function min. typ. max. unit transmitter lspowmon normalized laser power monitor voltage bol 0.44 0.5 0.56 v lsbiasmon laser bias monitor voltage slope 17.8 20 22.5 mv/ma receiver rxpowmon input optical power monitor voltage slope 0.8 1.26 v/mw table 4.2.10 lvds interface symbol min typ max unit single-ended input swing 100 ? ? mvp-p common mode input voltage 850 ? 2200 mv input voltage range 800 ? 2400 mv input differential impedance 80 100 120 ? single-ended output swing 250 ? 400 mvp-p common mode output voltage 1100 1200 1300 mv table 4.2.11 lvttl interface symbol min typ max unit input high voltage v ih 2.0 ? v dd1 v input low voltage v il gnd ? 0.6 v output high voltage v oh 2.4 ? v dd1 v output low voltage v ol gnd ? 0.4 v
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 10 oki confidential 5. 5. 5. 5. mechanical information top view bottom view opt in opt out the back side of the transceiver is recess area without mechanical bolt holes. users can use this domain as trace area on users pcb. n ote: pigtail fiber length have to be specified between oki and users. figure 5 package outline(units:mm) table 5 connector optical sc/pc type standard other connectors are available@fc,lc,mu electrical 300pin berg megarray@84501-10x
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 11 oki confidential 6. 6. 6. 6. connector pin assignment table 6 pin assignments nuc: no user connect italics : txrefsel is available for multi-rate type, oat1041x-v5-c-yy. kjhgfedcba 1 nuc nuc gnd rxdout12p +1.8v rxdout8p gnd rxdout4p gnd rxdout0p 2 nuc nuc gnd rxdout12n +1.8v rxdout8n gnd rxdout4n gnd rxdout0n 3 rxratesel0 rxratesel1 nuc gnd rxpowmon gnd nuc gnd nuc gnd 4 +3.3v nuc gnd rxdout13p +3.3v rxdout9p gnd rxdout5p gnd rxdout1p 5 +3.3v nuc gnd rxdout13n +3.3v rxdout9n gnd rxdout5n gnd rxdout1n 6 nuc nuc nuc gnd rxpowalm gnd nuc gnd rxmute dout gnd 7 +3.3v nuc gnd rxdout14p +3.3v rxdout10p gnd rxdout6p gnd rxdout2p 8 +3.3v nuc gnd rxdout14n +3.3v rxdout10n gnd rxdout6n gnd rxdout2n 9 rxmutepoclk nuc nuc gnd nuc gnd nuc gnd rxlckref gnd 10 -5.2v nuc gnd rxdout15p -5.2v rxdout11p gnd rxdout7p gnd rxdout3p 11 -5.2v nuc gnd rxdout15n -5.2v rxdout11n gnd rxdout7n gnd rxdout3n 12 rxmutemclk nuc nuc gnd nuc gnd nuc gnd nuc gnd 13 -5.2v nuc gnd nuc -5.2v rxpoclkp gnd rxmclkp gnd rxrefclkp 14 -5.2v nuc gnd nuc -5.2v rxpoclkn gnd rxmclkn gnd rxrefclkn 15 i2cclock nuc nuc gnd rxrefsel gnd nuc gnd rxlockerr gnd 16 nuc nuc gnd txdin12p +1.8v txdin8p gnd txdin4p gnd txdin0p 17 nuc nuc gnd txdin12n +1.8v txdin8n gnd txdin4n gnd txdin0n 18 i2cdata nuc nuc gnd lsbiasmon gnd lspowmon gnd nuc gnd 19 +3.3v nuc gnd txdin13p +3.3v txdin9p gnd txdin5p gnd txdin1p 20 +3.3v nuc gnd txdin13n +3.3v txdin9n gnd txdin5n gnd txdin1n 21 txratesel0 txratesel1 nuc gnd lsenable gnd nuc gnd nuc gnd 22 +3.3v nuc gnd txdin14p +3.3v txdin10p gnd txdin6p gnd txdin2p 23 +3.3v nuc gnd txdin14n +3.3v txdin10n gnd txdin6n gnd txdin2n 24 txreset nuc nuc gnd lsbiasalm gnd nuc gnd nuc gnd 25 -5.2v nuc gnd txdin15p -5.2v txdin11p gnd txdin7p gnd txdin3p 26 -5.2v nuc gnd txdin15n -5.2v txdin11n gnd txdin7n gnd txdin3n 27 txfifores nuc nuc gnd nuc gnd nuc gnd nuc gnd 28 -5.2v nuc gnd txpiclkp -5.2v txpclkp gnd txmclkp gnd txrefclkp 29 -5.2v nuc gnd txpiclkn -5.2v txpclkn gnd txmclkn gnd txrefclkn 30 txfifoerr nuc nuc gnd txrefsel gnd lspowalm gnd txlockerr gnd
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 12 oki confidential 7. i2c diagnostic monitor (optional function) memory access to the oat1041 is thro ugh the i2c interface.the slave address defaults to a2h.the memory within the oat1041 is 128 bytes.the following tables detail the memory contents. all c onversions are updated every 13ms (nominal) or 20ms (max) in rotation. table 7 memory map table 00h-7fh (128bytes) address byte 0 byte 1 byte 2 byte 3 byte 4 byte 5 byte 6 byte 7 00h ? reserved ? 58h 60h ? ? ? ? lsbias msb lsbias lsb lspow msb lspow lsb 68h rxpow msb rxpow lsb ? ? ? ? ? ? 70h ? ? ? ? ? ? ? ? 78h reserved reserved reserved reserved reserved reserved reserved reserved laser bias current monitor : lsbias msb(64h), lsbias lsb(65h) these bytes contain the msb (64h) and the lsb (65h) of the measured the laser bias current. this reads as an signed 16-bit quantity at 19.073ua lsb,with a maximum range of 125ma.the lower four bits should be ignored. normalized laser power monitor : lspow msb(66h), lspow lsb(67h) these bytes contain the msb (66h) and the lsb (67h) of the measured the normalized laser output power. this reads as an signed 16-bit quantity at 0.000038147 lsb,with a maximum range of 2.5.the normalized laser power monitor (bol) is typ. 0.5.the lower four bits should be ignored. received average optical power monitor : rxpow msb(68h), rxpow lsb(69h) these bytes contain the msb (66h) and the lsb (67h) of the measured the average received optical power. this reads as an signed 16-bit quantity at 38.147uw lsb,with a maximum range of 2.5mw.the lower four bits should be ignored.
oc-192/stm-64 serdes transceiver module specification; oat1041x-v5-z-yy document no: qps-0302-020 rev. draft 0.5 oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company oki electric industry co., ltd optical components company 13 oki confidential 8. precautions for handling the circuits of these modules operate at very small signal. in order to avoid the degradation of the optical sensitivity due to external noise, the bottom pattern of these modules on the pcb should be ground pattern with low impedance. do not mount/pattern device/circuits which generate high frequency noise close to the module. in order to operate the module stable against the power noise, install the power supply noise reduction circuits. the impedance between the power and ground pattern of the power circuit should be as low as possible. the elements around the module should be mounted close to the pins of the module. if an optical power exceeding the absolute maximum ratings is fed to the module, the optical receiver may be damaged. set the optical input power appropriately when in use of these modules. 9. laser safety all version of transceiver are class 1 laser products fda complies with 21 cfr 1040.10 and 1040.11 requirements. also, all versions are class 1 laser products pre iec 825-1 . 10. ordering information oat1041x -v5-z -yy -[ ] note: in z = a, b, d, e, ? -[ ] ? is added when 150mhz is specified to be txrefclk frequency. table 9 ordering information x z yy -[ ] optical connector bit rate(gbps) fiber length txrefclk frequency s sc a 9.95 10 1m blank 600mhz f fc b 10.3 05 0.5m -l 150mhz l lc c 9.95/10.3/10.6/10.7 m mu d 10.7 e 10.6

▲Up To Search▲

Price & Availability of OAT1041F-V5-C-05

	To Download OAT1041F-V5-C-05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .